PE-MEMS-XY-i-GS60L – Inclination Sensor
Inclination angle ± 60°
Two-axis sensors
Vi hjälper dig att hitta rätt produkter. Ring 031-84 03 00.
Beskrivning
Electronic Inclination Sensor with analogue output
The electronic Inclination Sensor PE-MEMS-XY-i-GS60L is equipped with a MEMS acceleration sensor and has an analogue current interface for 4-20mA. The device is suitable as a two-axis sensor for an inclination measurement from 0 to ± 60° and is factory-adjusted to the user‘s inclination range. With an angular accuracy of ± 0.25°, the sensor is a cost-effective alternative to the Premium series.
- Low-cost inclination sensor in a plastic housing
- Compact design
- IP code of housing up to IP67
Technical data
PE-MEMS-XY-i-GS60L
| Housing size | 60 x 50 mm |
| Housing material | plastic |
| Housing high | 35 mm |
| IP code of housing | up to IP67 |
| Signal recording | acceleration sensor |
| Tilt angle | max. ± 60° |
| Angular accuracy | ± 0.25° |
| Temperature range | - 30°C up to + 70°C |
| Temperature coefficient | 0.15° / 10 K |
| Shock | 50 g, 6 ms |
| Vibration | 5–200 Hz |
| Immunity standard | EN 61 000-6-2 |
| Emission standard | EN 61 000-6-4 |
| Resolution | 3000 Digits / 16 mA |
| Supply | 9–36 V |
| Electronics | single |
| Signal output | 4–20 mA |
| Current consumption | < 65 mA |
| Connection | M12 plug |
| Maximum load current | each 500 Ω |