ATEX Compact Safty LED Torch
The TR/TS-60 and 65 are compact, lightweight, ATEX LED torches for safe use in the most demanding Hazardous Area workspaces. The torches are available in both right angle and straight versions.
Description
With a maximum light output of up to 330 lumens, the Zone 0 TR-65 and TS-65 have 3 power modes, are lightweight, compact and robust. Reliable, durable and easy to use and carry, they are ideal for use in the most demanding Hazardous Area work places.
3 power modes offer maximum choice and flexibility: the highest power setting gives a class leading light output of up to 330 lumens; medium power supplies up to 165 lumens with an increased duration of up to 14 hours. On the lowest power setting, the torch provides a useful light to be seen by which will last for up to 159 hours.
When the battery level falls to 15% of its maximum level, the battery charge indicator will flash (battery charge indicator only on TR/TS-65 models), and the beam will be interrupted momentarily once every 5 seconds (both TR/TS-60 and TR/TS-65 models), clearly alerting the user and ensuring they need never be left in the dark.
Strong and robust, both straight and right-angle torch models are made from impact and chemical resistant thermoplastic – the same tried and tested super tough material used on Wolf hazardous area torches for nearly 2 decades.
Ergonomically designed for comfort, all torches in the range are easy to operate, even when wearing gloves. Lanyard fixings allow the torch to be securely attached to a tunic, tool belt or bag.
Spare parts are readily available to enable users to replace the LED module, lens, clip, end cap, cassette or circuit if required.
The ATEX Zone 1/21 TR/TS-60 models are an economical and very viable alternative to the TR/TS-65 models. Certified for use in Zone 1/21, they emit up to 220 lumens from a single setting and have a 12 hour battery duration.
ZONES: 0, 1, 2, 21 AND 22
Light output/duration/power:
- Right Angle torch:
- 300 lumens emitted (TR-65) / 200 lumens (TR-60)
- Straight torch:
- 330 lumens emitted (TS-65) / 220 lumens (TS-60)
- Duration at different power levels: 7/14/159 hours (TR/TS-65)/Up to 12 hours (TR/TS-60)
- 4 x AA alkaline primary cells
- 3 power modes for different light output (TR/TS-65); single mode (TR/TS-60)
- Balanced spot and fringe optics
Certification:
- ATEX/IECEx Zone 0 (TR/TS-65) / Zone 1 (TR/TS-60)
- T4 temperature class
- IP66 and IP67 water and dust tight
Features:
- Battery level indicator (TR-65 & TS-65)
- Beam dip for last 15% of battery life for increased safety
- Right angled and straight models available
- Robust, reliable and proven materials
- Ergonomic design
- Compact and lightweight
- Large switch (easy to use even when wearing gloves)
- Deep discharge protection
- Highly robust, replaceable polymer clib and flat torch back increases stability when fixed to tunic (right-angled models)
- Anti-roll foot (straight models) & flat base (right-angled models) enable easy hands free illumination
- Two lanyard fixings – one at each end of the torch (right-angled models only, straight models have single lanyard fixing)
- Easy maintenance, spare parts available
- Supplied with batteries
Technical data
PRODUCT REFERENCE | TR-60 | TS-60 | TR-65 | TS-65 | |
---|---|---|---|---|---|
PRODUCT DESCRIPTION | ATEX Right Angle Zone 1 Compact Safety LED Torch | ATEX Straight Zone 1 Compact Safety LED Torch | ATEX Right Angle Zone 0 Compact Safety LED Torch | ATEX Straight Zone 0 Compact Safety LED Torch | |
CODE | I M2/II 2G Ex ib I Mb/IIC T3/T4 Gb II 2 D Ex ib IIIB T200°C Db |
I M1/II 1G Ex ia I Ma/IIC T3/T4 Ga II 2D Ex ib IIIB T200°C Db |
|||
TYPE OF PROTECTION | ‘ib’ intrinsic safety | ‘ia’ intrinsic safety | |||
AREA OF CLASSIFICATION (GAS) | Zones 1 & 2 Gas Groups IIA, IIB IIC |
Zones 0, 1 & 2 Gas Groups IIA, IIB IIC |
|||
TEMPERATURE CLASS (GAS) | T4 + T3 (depending on cells) | ||||
AREA OF CLASSIFICATION (DUST) | Zones 21 & 22 Dust Groups IIIA and IIIB |
||||
MAX SURFACE TEMP. (DUST) | T200°C | ||||
AMBIENT TEMPERATURE | -30°C to +40°C | ||||
CERTIFICATE | ATEX Baseefa11ATEX0236 IECEx BAS 11.0116 |
||||
ENCLOSURE | Impact Resistant Thermoplastic, Chemical Resistant | ||||
BASE + LENS RING | Shock Absorbing Elastomer | ||||
LENS | Polycarbonate | Toughened Glass | Polycarbonate | ||
BEAM TYPE | Spot with Fringe | ||||
LIGHT SOURCE | TYPE | High Power LED | |||
OUTPUT | 200lm | 220lm | High Power 300lm / Medium Power 150lm / Low Power 30lm |
High Power 330lm / Medium Power 165lm / Low Power 33lm |
|
LIFE | 10,000+ hrs | ||||
POWER SOURCE | PART NO. | 4 x AA cells (LR6) | |||
TYPE | 4 x LR6 Primary Cells to IEC 60086 | ||||
VOLTS | 4 x 1.5v | ||||
LOW BATTERTY INDICATOR | RED LED | No | Yes | ||
LOW BATTERY BEAM DIP | Yes | ||||
LOW VOLT CUT OFF | Yes | ||||
LIGHT DURATION | Up to 12 hours | Up to 7.0 hrs / 14 hrs / 159 hours | |||
INGRESS PROTECTION | IP66 + IP67 | ||||
WEIGHT (INC.CELLS) | 330g | 250g | 330g | 250g |