FP-MLH Flameproof Mini Line Heaters

 

Zone 1 or 2 (IIA, IIB, IIC) gas group

    SKU: FP, MHL, FP_MHL Categories: , Tag:

    Description

    The range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel, and is designed to efficiently transfer heat to a flowing medium (liquid, air or gas). The FP-MLH range is certified for use in hazardous areas where the atmosphere is classified as a Zone 1 or 2 (IIA, IIB, IIC) gas group.

    Features

    • Certified to ATEX standards
    • Weatherproof protected to IP66 or NEMA 4 (FP4-MLH only)
    • Choice of built in process temperature sensors and externally adjustable option
    • Mild steel or 316 stainless steel vessel
    • Suitable for ambient temperatures from -40°C to +40°C (FP-MLH) and -60°C to +60°C (FP4-MLH)
    • Standard range of high quality Incoloy or stainless steel rod-type elements, designed for water or withdrawable ceramic core elements, designed for oil
    • Maximum allowable working pressure up to 10 barg / 145 psig, subject to design parameters
    • Designed for both horizontal and vertical installation (if mounted vertically, terminal box must be located at the bottom)
    • FP4-MLH range available with multi approvals

    fpmlh-model

    Technical data

     

    Certification ATEX  II 2 G
    EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-31
    Ex d IIC T4 to T6 Gb Zone 1 and 2
    CU TR (EAC)*FP4-MLH also certified to ATEX / IECEx, CSA, Inmetro, KGS, CNEx, CCOE

     
    Enclosure Cast aluminium alloy with a maximum of one M20 and one M25 cable entry, external and internal earths and screwed terminal cover (FP4-MLH – mild steel or 316 stainless steel)

     
    Elements High quality nickel chrome resistance wire compacted in magnesium oxide insulating powder and sheathed in corrosion resistant Incoloy 825/800, 316L stainless steel, withdrawable ceramic core elements housed in mild steel or 316L stainless steel tube

     
    Pressure Maximum allowable working pressure up to 10 barg / 145 psig subject to design parameters

     
    Design Code Sound Engineering Practice (SEP)

     
    Vessel Mild steel or stainless steel

     
    Insulation Mineral wool

     
    Cladding Coated mild steel or 304 stainless steel

     
    Voltage Standard units are normally designed for 220V to 254V (1 phase) or 380 to 440V (3 phase)

    Models

     

    Model FP-MLH1S FP-MLH2S FP-MLH3S FP-MLH6S FP-MLH9S FP-MLH3L FP-MLH6L FP-MLH9L FP-MLH12L FP-MLHX1 FP-MLHX2 FP-MLHX3
    Loading (kW)

    1

    		 2 3 6 9 3 6 9 12 1 2

    3
    Dim A (mm)

    475

    		 475 475 475 475 925 925 925 925 925 925

    925
    BSP/NPT 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1” 1”

    Download

    Datsheet | FP-MLH

    Manual | FP-MLH manual

    Exheat products catalogue

     

    Exheat