RF 10 H SW868
Wireless position switch with sWave® wireless technology
Need help finding something? We're here to assist you. Call 031-84 03 00.
Description
- Thermoplastic enclosure
- sWave® wireless technology
- No wiring and pipe laying required
- Power supply by Lithium battery
- Easy programming of receiver
- Output signal can be individually configured at the receiver
Technical data
Applied standards
EN 60947-5-1, EN 61000-2, EN 61000-3, EN 301 489-1, EN 301 489-3, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: 0.5 … 0.6 Nm
Degree of protection
IP67 (IEC/EN 60529)
Ambient temperature
–20 °C … +65 °C
Operation cycles
max. 12000 telegrams with repetitions/h
Mechanical life
> 1 million operations
Actuating time
min. 80 ms
Note
no status signal available
Wireless approvals
Europe: RED 2014/53/EU
Weight
30 g
Wireless technology
Protocol
sWave®
Frequency
868.3 MHz (Europe)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
350 kHz
Wireless range
max. 450 m outdoors, max. 40 m indoors
Voltage supply
Voltage source
lithium battery CR 2032 (replaceable)
System
Lithium-MnO2
Nominal voltage
3 V
Nominal capacity
0.23 Ah
Battery life
depending on the switching frequency
sensor mainly not activated with micro switch:
1 s: approx. 0.1 years, 10 s: approx. 1.1 years, 100 s: approx. 5.0 years
sensor mainly activated with micro switch:
1 s: approx. 0.1 years, 10 s: approx. 1.0 years, 100 s: approx. 2.8 years