GMI D5030D Isolators

I.S. SIL3 Switch/Proximity Relay-Out Repeater

Need help finding something? We're here to assist you. Call 031-84 03 00.

    SKU: D5030D, D5030 Categories: , Tags: ,

    Description

    The Switch/Proximity Detector Repeater D5030 is a module suitable for applications requiring SIL 3 level in safety related systems for high risk industries. The unit can be configured for switches or proximity detectors, located in Hazardous Area, and repeats the input state to a relay contact in Safe Area. The selectable fault detection circuit is available for proximity sensors or switches equipped with end of line resistors. In the double-channel model, the second output can be configured to repeat the second input, to duplicate the first input or to report the first input fault. If needed, the output can also be inverted.

    FEATURES

    • SIL 3 / SC 3
    • Input from Zone 0/Div. 1
    • Installation in Zone 2/Div. 2
    • 2 fully independent channels
    • High voltage/current rating relay output
    • Field open and short circuit detection
    • In-field programmability by DIP Switch
    • Three port isolation, Input/Output/Supply
    • High Density, two channels per unit

    CHANNELS

    2

    Technical data

    Supply
    Voltage 24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
    Current Consumption 35 mA @ 24 Vdc with short circuit input and relay energized, typical.
    Power Dissipation 0.85 W @ 24 Vdc with short circuit input and relay energized, typical.

    Input
    Input switching current levels ON ≥ 2.1 mA, OFF ≤ 1.2 mA.
    Fault current levels open fault ≤ 0.2 mA, short fault ≥ 6.8 mA
    Input equivalent source 8 V 1 kΩ typical (8 V no load, 8 mA short).

    Output
    Type Voltage free SPST relay contact.
    Contact material Ag Alloy (Cd free), gold plated.
    Contact rating 4 A 250 Vac 1000 VA, 4 A 250 Vdc 120 W (resistive load).
    Contact min. switching current 1 mA.
    DC and AC load breaking capacity refer to Instruction Manual.
    Mechanical / electrical life 5 * 10⁶ / 3 * 10⁴ operation, typical.
    Operate / release time 8 / 4 ms, typical.
    Frequency response 10 Hz maximum.

    Isolation
    Test Voltage I.S. In/Out 2.5 kV; I.S. In/Supply 2.5 kV; I.S. In/ I.S In 500 V; Out/Supply 2.5 kV; Out/Out 2.5 kV.

    Environmental conditions
    Operating temperature temperature limits –40 to +70 °C.
    Storage temperature temperature limits –45 to +80 °C.

    Safety description
    Equipment Associated apparatus and non-sparking electrical equipment.
    Safety parameters Uo = 10.5 V, Io = 22 mA, Po = 56 mW at terminals 7-8, 9-10. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.

    Mounting
    Type DIN-Rail 35 mm, with or without Power Bus.
    Weight about 140 g.
    Connection by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
    Dimensions Width 12.5 mm, Depth 123 mm, Height 120 mm.

    Download

    Datasheet Engelsk

    Instruktionsmanual, 5030S-5030D

    Instruktionsmanual, D5000 – D5200 Series